Banjo Bridges

The Stewart-MacDonald 'Tune Craft' Style 5 String banjo bridge is available in 5/8" (15.87mm) only. It is machined from maple and tipped with ebony. it is pre-notched for 1-11/16" (42.86mm) string spacing

A pre slotted flat top, classic shaped, banjola bridge blank in solid ebony. 

See below for measurements

The 'Leader' is a USA made two-footed high quality banjo bridge made from rock maple and tipped with ebony. The string grooves are ready cut and precisely positioned.

Made in the USA by Pisgah Banjo Company, this iconic bridge is modeled after Pete Seeger’s uniquely styled banjo bridge. It is designed to create more volume and “plunk”  without increasing sustain or overtones. It will also never tip over!  Choose from 1/2″, 5/8″, 11/16″, and 3/4″ height, all with standard 1-11/16″ string spacing. This bridge is designed to evenly distribute string pressure to all 4 feet. Bridge is 3-D printed from Polylactic Acid (PLA), a biodegradable polymer derived from sugar cane and will eventually biodegrade in 200-300 years. Original bridges were made out of plastic circuit board material! Add some style, tone and options to your banjo arsenal!

Choose from 11/16", 3/4" and 5/8"

The 'Acousticraft' is a USA made three-footed high quality banjo bridge made from rock maple and tipped with ebony. Bone string saddle inserts are fitted in the ebony tip. The string grooves are ready cut and precisely positioned.

A three-footed select maple bridge with an ebony top. The string grooves are ready notched and precisely positioned. Available in 1/2", 5/8",11/16" and 3/4"

(Please note - this bridge has had the original slots sanded out and re-cut in the correct orientation for a left handed banjo so it will be slightly less than 5/8" but not noticeable. You can't just turn the bridge around as there is a specific front and back of a well made bridge)

Deering’s patented 5/8" Smile™ Banjo Bridge is created with a curve on the bottom to fit into the natural curve created on a banjo head by the bridge when under string tension. This relieves the stress found in a traditional bridge allowing the Smile™ Bridge to vibrate without constriction. The result is an instantly fuller and more expressive mid-range, less constricted low frequencies, and a wonderful balance across all strings. All Goodtimes are fitted from new with a 5/8" bridge.

(Please note - this bridge has had the original slots sanded out and re-cut in the correct orientation for a left handed banjo so it will be slightly less than 5/8" but not noticeable. You can't just turn the bridge around as there is a specific front and back of a well made bridge)

Created from the most dense maple to create the best transmission of sound, the finest tone, and clarity. Personally selected and signed by Greg Deering, with his signature of approval. The unique GD design and 'tilt angles make this bridge perform to it's maximum potential. Will bring any banjo to life and get the best volume and tone out of your banjo. Available in 5/8 and 11/16 height.

Produced in Italy by Master Craftsman Silvio Ferretti ...The ‘Scorpion’ Banjo Bridge is Hand-Crafted from the finest aged and seasoned, tight grained European maple which is tipped with seasoned dense black ebony. It is worked to exacting angles and tolerances to produce the finest crisp, warm, clear tone and produces maximum volume from your banjo. The bridge is precisely pre-slotted for standard spacing on a 6-String Banjo. 

These bridges are for radiused fingerboards only.....The choice of many professionals.

Choose between 1/2" and 5/8" bridge height