Banjo Bridges
The 'Acousticraft' is a USA made three-footed high quality banjo bridge made from rock maple and tipped with ebony. Bone string saddle inserts are fitted in the ebony tip. The string grooves are ready cut and precisely positioned.
The Stewart-MacDonald 'Tune Craft' Style 5 String banjo bridge is available in 5/8" (15.87mm) only. It is machined from maple and tipped with ebony. it is pre-notched for 1-11/16" (42.86mm) string spacing
Genuine Deering USA 4 string banjo bridge crafted from selected maple.
A pre slotted flat top, classic shaped, banjola bridge blank in solid ebony.
See below for measurements
The 'Leader' is a USA made two-footed high quality banjo bridge made from rock maple and tipped with ebony. The string grooves are ready cut and precisely positioned.
Created from the most dense maple to create the best transmission of sound, the finest tone, and clarity. Personally selected and signed by Greg Deering, with his signature of approval. The unique GD design and 'tilt angles make this bridge perform to it's maximum potential. Will bring any banjo to life and get the best volume and tone out of your banjo. Available in 5/8 and 11/16 height.
Produced in Italy by Master Craftsman Silvio Ferretti ...The ‘Scorpion’ Banjo Bridge is Hand-Crafted from the finest aged and seasoned, tight grained European maple which is tipped with seasoned dense black ebony. It is worked to exacting angles and tolerances to produce the finest crisp, warm, clear tone and produces maximum volume from your banjo. The bridge is precisely pre-slotted for standard spacing on a 6-String Banjo.
These bridges are for radiused fingerboards only.....The choice of many professionals.
Choose between 1/2" and 5/8" bridge height
- Made in the U.S.A
Made in the USA by Pisgah Banjo Company, this iconic bridge is modeled after Pete Seeger’s uniquely styled banjo bridge. It is designed to create more volume and “plunk” without increasing sustain or overtones. It will also never tip over! Choose from 1/2″, 5/8″, 11/16″, and 3/4″ height, all with standard 1-11/16″ string spacing. This bridge is designed to evenly distribute string pressure to all 4 feet. Bridge is 3-D printed from Polylactic Acid (PLA), a biodegradable polymer derived from sugar cane and will eventually biodegrade in 200-300 years. Original bridges were made out of plastic circuit board material! Add some style, tone and options to your banjo arsenal!
Choose from 11/16", 3/4" and 5/8"
Banjo bridges are available here at the Eagle Music 'Pickers Paradise' in a range of heights and designs.
Highest quaility banjo bridges for 5 string and four 4 string banjos. Parts by Deering, Snuffy Smith, Leader, USA Maples, Grover, Minstrel, Goodtime, Acousticraft, Tune-Kraft, Non-Tip, just to mention some of the banjo bridges that you will find here in the 'Pickers Paradise' at Eagle Music.